VHF and UHF Projects

Being an avid builder I have a number of projects I have put together for VHF Contesting. I currently have 6m through 23cm up and running with the parts to put together for 13cm and 9cm. I am active with weak signal work including K1JTs WSJT modes. 6 and 2 meter equipment is in the shack provided by an IC746. Everything else is up on the tower and only the IF signals are brought into the shack. Accomplishing this has required some work over the past couple of years. I am in the process of documenting what has been done and what needs to be done. Links are the thumbnail photos.

 
DC-DC2s.jpg When hilltopping in the 10GHz and Up contest, I needed to have a power source for my laptop. Rather than buy one, I decided to build it out of parts I had on hand. Here is a PDF file describing this probject.

 
23cm-boxs.jpg Just a photo so far but here is my 33cm and 23cm white box on the tower. A writeup is in the works.

 
33cm_amps.jpg Just a photo so far but here is my 33cm 85w Amplifier. A writeup is in the works.

 
33cm_amps.jpg Just a photo so far but here is my 23cm 30w Amplifier. A writeup is in the works.

 
The EME Setup Construction of my more permenant EME array.

 
Taming the IC-746 frequency drift Taming the IC-746 frequency drift.

 
AA1YN Makes the Moscow News AA1YN Makes the Moscow News. Did I really build this? Click on this image to read about my water detector to be launched by Russia to the moon !!! Note the photo and credit of the equipment and then come back here and click on my moon tracker project.

 

| AA1YN Home | VHF Home | WSJT Home |